Overview

The Honeywell/Voyager 1450g should be configured using the following document instead of through the Ezconfig application.  Something doesn't allow the STX/ETX to work properly when configuring it through software.  You also need to have Turbo mode enabled to scan a driver's license correctly.


Procedure

  1. Download the attached 1450g-STX-ETX.pdf file
  2. Scan all 5 barcodes starting from the top.  Note: The first barcode will reset the scanner to defaults, if you omit digits from UPCs or have other custom configurations, do not scan the first barcode.